GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

弹性机器人的LQG／LTR控制

ＬＱＧ／ＬＴＲ设计方法仅适合于最小相位系统，本文对单臂弹性机器人系统，进行适当的处理和对方法进行改进后，仍采用ＬＱＧ／ＬＴＲ方法设计控制器，得到的闭环系统有较强的鲁棒性。     

H∞控制及其应用

本文叙述了Ｈ∞控制器设计的频域法和代数法，在频哉法中介绍了标准问题的模型匹配解法和丁谱分解法；在代数法中介绍了多项式法，直接状态空间法，最后简述了几个实际应用的例子。     

8mm衰减标准装置

对8mm衰减标准装置的工作原理、系统设计、主要技术特点、误差分析等进行了详细介绍,并附有测试和分析数据。该装置达到了80dB的量程、全频段和±0.003dB/10dB的准确度。     

关于平面空穴流动的截断误差减小方法(英文)

提出了一种新的截断误差减小方法。该方法是利用在粗网格 ( 2 h)上估算截断误差进而减小在原始网格( h)上的误差的迭代过程 ,最终目的是利用粗网格得出更精确的结果以及发展一种新的粗网格直接数值模拟方法     

基于软件工程基本原理的电子商务网站建设

针对电子商务网站建设过程中存在的问题，从软件工程基本原理出发，分析结合软件生存周期瀑布模型提出电子商务网站的建设过程，对克服当前主要不足有一定的帮助作用。     

共析钢的相变超塑性扩散连接

根据高温扩散和空洞蠕变闭合理论，在恒温超塑性扩散连接基础上建立相变超塑性扩散连接数学模型，可确定各工艺参数，诸如循环上限温度、压力、循环次数以及升、降温速率等对连接的影响，作为选择合适工艺参数的依据。经过对T8共析钢相变超塑性扩散连接试验研究，证明该理论模型与试验结果吻合较好。     

射线检测厚度宽容度的分析与测定

厚度宽容度是变截面工件射线检测的重要参数。本文分析了典型工件的厚度差,以及不同灵敏度级别的厚度宽容度。应用胶片特性曲线、曝光曲线,从实验角度测量了厚度宽容度,并对结果作了分析和讨论。     

黑井古镇:消逝的古盐都

虽不见了旧时车马喧嚣的繁华，但走在那红砂石铺就的街面，还是能见到不少尚好的陈年旧物，寻觅到一些沉积的历史片段。这要得益于当地人世代坚守的“卖屋不富，置物不穷”的古训，